Calibration Bench : 7082 Mains Power Control


View larger Image	View larger Image

Mains Power is controlled via a 7082 single-phase unit equipped with 2 mains power sockets (types selectable). A further 4 sockets are available on the underside of the console. A main power switch, residual current circuit breaker with over-current protection (RCBO), and under console lighting switch are included. Mains input and lighting supply lines are filtered.

The mains voltage is continuously monitored on a digital meter. The two front panel sockets can be supplied via an isolation transformer as an optional extra. With this fitted the total current from the two sockets is limited to 1A. Another additional option is a 110V DC 5A supply with circuit breaker.

Available fittings include UK 13A, Euro Shuko 16A, Indian Round Pin 15A, and US 15A.

Specification
Switches	Mains power on/off switch to provide isolation for the entire bench. Lighting switch to provide separate control of the work-top lighting.
Protection	16A overload protection for entire bench. Residual current protection is 0.03A. 5amp circuit breaker is fitted for the unregulated 110 volt DC supply option.
Sockets	2 x console front panel earthed sockets, 4 x console underside earthed sockets. 2 x 4mm front panel shrouded sockets for the 110-volt DC supply option.
Meters	Mains voltage (0-300V)
Filter	2 filters fitted to attenuate mains spikes
Panel size	Width 273 x height 201mm
Cooling	2 x Mains powered 80mm cooling fans are fitted internally to the console.
Earthing	A PE socket is provided. All metal parts of the bench are connected to mains earth.
Options
7063	Isolated mains power up to 1 Amp, from the two front sockets. A 1 Amp cartridge fuse protects the supply.
7075	110 volts DC up to 5 Amps. The supply is via two front panel mounted shrouded sockets and is protected by a resettable 5 Amp circuit breaker, this also acts as a independent 110V power switch.

7080/81 Bench and Consoles

7082 Mains Power Control
7083 Dual 24V DC Supply
7088 Variable Power Unit
7086 Adjust. DC Power Supply
7087 Quad DC Power Supplies

7051 MF Calibrator/Control
EasyCal Software

7062 Pressure Calibrator
7064 High Pressure Calibrator
7065 Cal. Press. Indicator
7038 Multif. Press. Indicator
7066 Differential Press. Cal
7084 Pneu. Line Press. Control
7032 Auto Pressure Calibrator

7085 Temp. Distribution Panel
7079 Loop Anc. Calibrator
7068 RTD Calibrator
7067 Loop Calibrator
7069 V-I Loop Calibrator
7061 Multifunc. Proc. Calibrator

7070/72 Dry Block Calibrators
Calibration Pumps & Test Kits
Fittings and Extras

Introduction

QuickView Datasheet (pdf)

Full Datasheet (pdf)

Cal. Bench Module Viewer

Bench Ordering Information