The Calibration Bench is constructed from a 7080 bench and primary console. The Secondary Console, 7081 is an optional expansion.
The bench consists of frame, back plates, support arms, and worktop. It is supplied in knockdown format that is simple to assemble - a separate assembly instruction manual is provided.

The primary console is mounted above the tabletop workspace and houses the calibration modules, DC and AC power supplies and the central control centre. Switchable under-console lighting is provided as a standard feature.

The Secondary console is located under the primary console, and can house power supplies, pressure calibration modules, and temperature distribution.

These consoles are supplied complete, fully tested and with the modules installed. They are ready to operate and require only mains power and line pressure to be connected.

The bench assembly is constructed from mild steel throughout. The side panels and console support arms are welded to provide a strong frame. The whole assembly paint finished in hardwearing light grey oven baked paint.

Dimensions
Overall (including console)	Width 200 x height 156 (or 166) x depth 85cm, 175Kg typical.
Primary Console	Width 200 x height 29 x depth 47cm, 90Kg typical.
Secondary Console	Width 192 x height 40 x depth 19.5 cm, 30Kg typical.
Height from worktop
Primary Console	42cm
Secondary Console	12.5cm
Worktop	Width 200 x 80 deep x 3.8cm, 85cm above floor, durable finish.
Supply Connections
Electrical – The Primary console is powered from a single-phase mains supply via a 16A heavy-duty type IEC socket at the rear of the console. The Secondary console is powered from the primary console via a IEC power link cable. Pressure - The external line pressure input ports are arranged on the rear of the primary and secondary consoles.