The 5011 is primarily a programmable resistance / RTD source. With the ability to add DC Voltage, Thermocouple Simulation and DC Current the 5011 is truly a versatile temperature calibrator.

High performance resistance of is offered as standard with an accuracy of 0.01% and 1 mOhm resolution from 50 Ohm to 1 kOhm.

Simple front panel operation allows the user to quickly set the function and output required.
Using the jog / shuttle dial deviation the user can finely adjust the output value as a percentage (+/-9.99%). All this information is shown on a clear, easy to read LED display.

As standard the 5011 uses a SCPI command structure for programming. The 5011 also supports the older 9811/19/20 command set making it an ideal replacement for these models.

The DCV / Thermocouple option provides a DC voltage source (+/- 20V) and simulates thermocouple types K, J, T, R, S, N, E and B.

A DC Current option is also available which sources up to 220mA. This makes the 5011 ideal for accurate process control calibration.

Calibration Made Easy
Connect the 5011 to a PC/Laptop (via RS233, GPIB or USB) installed with Time Electronics EasyCal and automate the calibration process. Increase speed of calibration and consistency of results, produce calibration certificates and reports to ISO 9001 quality standards.